A. Technical parameter:

1. Machine specification: forming thickness)0.5-1.0mm, yield strength≤G250Mpa

2. Forming speed: 10M/min (EXCLUDING CUTTING STOP TIME)

3. Forming roller: about 16/8 stations

4. Main motor power: 5.5KW,

5. Roller material: Gcr15 steel, surface coated with chrome

6. Main shaft material: 45# steel

7. Main axis dia.: ￠80mm

8. Hydraulic cutting pressure: 10-12Mpa

9. Cutting method: hydraulic powered, cutting after roll forming.

10. Cutting blade material: Cr12 quenching treatment

11. Electrical controlling system: Whole line adopted PLC control, cut to length tolerance≤1.5mm

B. Roll forming line comprised equipment

ROLL FORMING MACHINCE comprised of 3T manual uncoiler, feeding guiding, roll forming machine, cutting equipment, electrical controlling system, output table.

C. Flow Chart

Uncoiling – feed Guiding–Roll forming –fly saw cutting – Run-out table

The Shutter Box Cover Machine can be divided into two-pieces installed and three-pieces installed machine.

1, Two Pieces-Installed

Our display screen is touch screen, not text touch screen.

Sussman roll forming system: We will make the hand wheels at the feeding device to adjust feeding width, and we also make the wheels with the numbers then you know how to adjust right and left sides, also we made the rulers on the bedding, you can adjust the profile height and width according to the rulers.

Screw with numbers is to adjust material thickness easily, also with protecting cap also add laminating film device and felt to make the board flatter and smoother without scratches.

The  machine is equipped with a detection switch device, in case of emergency, emergency alarm, stop operation.