1. Material thickness: 0.8-2mm

width 80-300mm adjustable any size by motor, height 40-100mm adjustable any size by motor

2. The speed of the roll-in: 10M/min

3. The number of teh roller: 20 Stations

4. The material of the roller: use the excellent hammered steel GCr15 to be quenched as a whole, then to process by numerical control.

5. The material of the TEMPprincipal axis: use the excellent steel No.45 to process.￠75mm

6. The power of teh TEMPprincipal electric motor: 11kW cycloid reducer, width, height adjustment motor 3 * 0.75kw

7. Hydrodynamic station cut: 7.5 KW

8. Drive-by-wire system: The whole machine uses the PLC industrial computer to control by frequency conversion.

9. The size of the shape equipment: 10.3×1.8×1.4 (see the appendix 2)

10. The gross weight of teh equipment: 10 T

11. Accessories: one set of teh stacking shelf, one set of leveling mechanism, one set of punching and cutting mechanism, one set of hydrodynamic station, one set of computer control system

Machine List:

Our display screen is touch screen, not text touch screen.

Sussman roll forming system: We will make the hand wheels at the feeding device to adjust feeding width, and we also make the wheels with the numbers then you know how to adjust right and left sides, also we made the rulers on the bedding, you can adjust the profile height and width according to the rulers.

Screw with numbers is to adjust material thickness easily, also with protecting cap also add laminating film device and felt to make the board flatter and smoother without scratches.

The  machine is equipped with a detection switch device, in case of emergency, emergency alarm, stop operation.