Garage door track angle usually refers to either track alignment angles or the angle iron supports used to support the track. Both matter, so here’s a simple breakdown:

1. Track Angle (Alignment Angle)

This is the positioning/angle of the tracks.

Vertical tracks

garage door vertical track

• Should be plumb (straight up and down)
• Not tilted inward or outward
• Proper spacing from the door is critical

Horizontal tracks

garage door horizontal track

• Usually have a slight downward pitch toward the back of the garage (depending on setup)
• Must be level side-to-side
• Supported so they don’t sag

Curved track radius (“angle” through the turn)

• The curved section controls the transition angle from vertical to horizontal
• Common radii:
  • 12" radius
  • 15" radius
  • High-lift setups may differ

Technical Data:

Technological process:

Uncoiling with leveling—————Hydraulic pre-punching——Roll forming——Hydraulic Cutting—Products collecting

Profile drawing depends on the client's request:

This machine can do 2 profiles in one machine: One is the side rail; other one is the supportive rail

Angle Iron Track Support (Track Angle)

Sometimes “angle track” refers to the angle iron supports that hold the horizontal tracks.

These are metal angle supports used to:

• Suspend horizontal tracks from the ceiling
• Keep tracks rigid and aligned
• Support door weight

Usually made from perforated steel angle.