J Track Trim Roll Forming Machine

Email: info@suhangmachine.com

Tel: 008613606193016

Whatsapp: 8613606193016

description1

Zipper closure 1/4 zip athletic pullovers for men. Stretchy, lightweight, fast-drying fabric for superior performance. REGULAR FIT - US standard sizes. An athletic fit that sits close to the body for a wide range of motion, designed for optimal performance and all day comfort. FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them in place during workout

Description

Specification

J, L and U Trim are metal trim accessories used to protect free edges of gypsum wallboards.

Super Stud metal J, L and U-Trims is used at the termination of a gypsum board finished wall or ceiling. This may be at a door or window opening, at a transition to a different type of finish, or at any edge where a clean, straight, smooth edge is required.

The short leg of Super Stud J-Trim is hemmed for a safe, clean, smooth edge, and both legs are angled for a tight grip on gypsum or other sheathing. The long leg has a slight rib at its base to act as a screed for any finishes that are applied, and the outer edge of the long leg has a small bevel for a smooth tight fit.

Technical Data:

Item NO	Description	Offered specification
1.0	Roll forming machine	J Trim profile
1.1	Rolling speed	0-12 meters /minute
1.2	Rolling thickness	Gauge 24-Gauge 29
1.3	Raw material	G550 Galvanized coils
1.4	Main motor	5.5kw
1.5	PLC	Delta Brand
1.6	dimension	About 5500×1035×1000(mm)
1.7	Voltage	220V, 60HZ, 3phases
1.8	Roller stations	About 16 stations
1.9	Roller material	45 steel
1.10	Shaft diameter	Φ60mm ,material is 45# forge steel
1.11	Transmission	By chain One inch chain
1.12	Material of chain	45# forged steel with frequency quenching
1.13	Material of cutting	Cr12Mov with quench HRC58-62°
1.14	Tolerance	6m+-1.5mm

Machine List:

3 ton passive de-coiler	1 set
Main roll forming machine	1 set
PLC Control box	1 unit
Hydraulic station	1 unit
Stop cutting device	1 unit
Out table	1 units
Safety cover	1 unit